Build Your Own Calisthenics GYM! Do it yourself, do it cheap!

Share it with your friends Like

Thanks! Share it with your friends!

Close

[Walk More and Reap the Benefits Click Here Now]

Use hypnosis to boost your unconscious motivation to walk more, and enjoy it
Click Here Now to Download MP3


links will open in seperate tab

Most popular MP3 Self Hypnosis sessions in Personal Fitness
GYM Motivation | Fitness Class Motivation
Stop Hating Exercise | Total Fitness Motivation Pack

New All Day Slimming TEA - Click Here


Here’s the links mentioned in the video:

Julio’s (How to make a Barstarzz park:) https://youtu.be/29ESce1kqRc

And for laying turf:
https://www.youtube.com/watch?v=-CcdjSqvEs0

————————————————————————————————————
The project took me about a week from start to finish from digging the holes to laying the turf.

Here are some of the things you’ll need:

Three, 4x4x10 ft Redwood post
One, 4x4x8 ft Redwood post

One 1in x 8 ft Galvanized Pipe
(For pull up bar and top human flag bar)

One 1in x 5 ft Galvanized Pipe
(For shorter pull up bar)

Three 1in x 2 ft Galvanized Pipe
(For human flag bars)

Two, 1 1/4 inch 10 ft Galvanized Pipe
( For dip bars, Home Depot will cut it upon request for free)

Two, 1 1/4 90 degree elbow joint
(for dip bars)
—-
Two 1 1/4 flange
(Connects to the 4×4 by10
and into the dip bars)

Eight 3/8 16 x 6 Hex Bolts (dip bars)
Eight 3/8 16 x 1 1/2 Washer
Eight 3/8 Hex Nuts

Nine 3/8 16 x 4 To hold poles from possible movement (Optional)
Nine 3/8 16 x 1 1/2 Washer (Optional)
Nine 3/8 Hex Nuts (Optional)

(To drill through both wood and metal
you’ll need a titanium nitrate drill bit)

10 bags of Concrete.
1 container of water resilient wood stain. (Optional)
—-
First I connected the 8ft top bar into all three 4×4 by 10 wood posts. Then I drilled holes and connected the 3 human flag bars.

I dug Three 2ft holes for the posts and raised it up (I put rocks in the holes to hold the posts together) then poured about 1 1/2 bags into each hole.

Later that night I dug the two holes for the dip bars.
connected the threaded galvanized pipe into the elbows and connected the other threaded ends to the flanges on the 4×4 by 10 wood posts.

I put rocks to hold the dip bars in place and poured 1 1/2 bags of concrete in each hole on top of the rocks.

The same night I also made the 2 ft hole for the 4×4 by 8 ft post
about 5 ft away form the 4×4 by 10 ft post. I connected the flange then installed the last 5 ft smaller pull up bar and I was done for the day.

The next day I cleared the ground of any loose gravel and laid down some crushed gravel. I lightly watered it down and compressed the gravel with a roller. I covered the crushed/compressed gravel with weed barrier. I laid out my grass turf in the sun for a couple hours before pulling it over the area I wished to cover and began to cut the shape I wanted along the plastic grass liner. I nailed it down on some ares with 6 inch nails to help secure the turf. I put some sand into the fibers of the turf and brushed it through to help it stand up. Then I was done!

Any addition questions feel free to leave a comment below and
Thank you!
———-
I do not own the rights to these songs used in the video:

Artist: Crashbomb
Song: Jello mold struggle

Artist: Kryder
Song: Crocodile Tears

Artist: Weird at last
Song: No man sky

Get Total Gym TV. | Only $69.95 to stream workouts for a year!

Comments

ImmoralJester says:

"The kids can have fun working out" -Dad
"I like hanging on this pipe" – Kid

Buff Ectomorph says:

$400 in 2019, so $2,400 in 2021?

Rumeel12708 says:

Awesome I am thinking of building my own as well but I want the main bar to be higher so I can use my gymnastic rings for full motion and not have to bend my legs.

Bryan says:

How did u get the turf around the poles?? Can't figure it out and I don't want to cut it and ruin my expsive turff😳😳

Hwa-jin Na says:

This is exactly what I was looking for.

Ozan Areyiz says:

Finally a good video without a ridiculous music.

Troubled Flame says:

What type of metal did you use for the bars?

Lan ti says:

400$ ?? Get the f**k out of here

Orthal says:

My first impression of you is like: "wow such a nice guy" so wholesome and nice. Keep it up.

skyler bauer says:

Prices of lumber go up rip lol

boomdiddyah says:

What bars did you use for the ladder?

C R says:

great video, love that you show so much love to the person who gave you inspiration for the build. Hope all is well!

Stephen Heath says:

Thanks for sharing, planning something like this on a smaller scale, very useful 👍

Anoop says:

I was looking for building one and you gave me an idea
Thanks mahn

NOOB phobia says:

Such a lovely cute daughter you got

Franklin Bittner says:

Very nice , but for sure I would use 6×6 instead of the weak 4×4

Uchiha Itachi says:

Love you bro from India

One Love says:

Oh shit what a wide paralles bars WTF, do it right, you're a wide individual but WTF
Yeah Break your arm

MR says:

Good stuff man 👍. Thanks for the video. Its inspiring.

Collin Washburn says:

Does snow affect builds like this?

Write a comment

*

The owner of this website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon properties including, but not limited to, amazon.com, endless.com, myhabit.com, smallparts.com, or amazonwireless.com.
Home Terms Of Use Contact Us Affiliate Disclosure Amazon Affiliate Disclaimer DMCA Earnings Disclaimer